Watlow WATROD Duct Heater - Manual (Page 5)

WATLOW IND.
WATROD Duct Heater Installation & Maintenance Manual
I&M NUMBER: 316-42-6-1 Page: 5
Date:6/11/2008 Rev: 3.00
________________________________________________________________________________________________________________________________________________________________________________________________________________________
WATLOW IND.n # 6 INDUSTRIAL LOOP RD. n HANNIBAL MO, 63401n PHONE 573-221-2816 n FAX 573-221-3723
Figure #3
Install Lifting strap between element bundle and support bracket. Do entwin straps between elements.
Place second strap around terminal enclosure.
Figure #4
For Vertical lifing place strap through the space between the element bundle and the insulation retainer.
Do not slip the strap through the elements.
For other optional lifting procedures please consult the factory.
8. Orientation / Mounting
The duct heater may be mounted vertically, or horizontally, from the left to right, top or bottom. The inlet
side of the unit must be at least 48" (1.2m) downstream from any transition in duct size or direction, or
from any air handling equipment. See Figure 3 for locations that should be avoided.