Watlow Series 988 - Manual (Page 74)

WATLOW Series 988 User’s Manual 4.47 Setup Menus, Chapter 4
Setup-Comm
Interface Type
Select the interface type for Output 4, Option S.
• [`485] selects EIA/TIA-485.
• [`422] selects EIA/TIA-422.
[IntF] This prompt appears only on controllers equipped with communications
hardware for EIA/TIA-485 and EIA/TIA-422 (98_ _-_ _ _ _-_S_ _).
Default
↓
[`485] [`422]
[IntF] [IntF]
Interface Type
Select the interface type for Output 4, Option U.
• [`485] selects EIA/TIA-485.
• [`232] selects EIA/TIA-232.
[IntF] This prompt appears only on controllers equipped with communications
hardware for EIA/TIA-485 and EIA/TIA-232 (98_ _-_ _ _ _-_U_ _).
Default
↓
[`232] [`485]
[IntF] [IntF]
[IntF]
[IntF]