Watlow Silver Series OIT - Manual

0600-0069-0000 Rev D
Watlow Silver Series OIT
Installation Guide
Introduction
Thank you for purchasing a Silver Series graphic operator interface
terminal (OIT) from Watlow. The Silver Series OITs are configured
using the EZware-5000 software (available separately from Watlow) and
include the following models:
Watlow P/N
Maple Systems
P/N
4.3” TFT display TS00-0043-0000 HMI5043N
4.3” TFT display TS00-0043-E000 HMI5043T
7.0” TFT display TS00-0070-0000 HMI5070TH
10.2” TFT display TS00-0100-0000 HMI5100T
This booklet describes the steps necessary for installing the Silver Series
OIT.
Copyright Notice
This manual is a publication of Maple Systems, Inc. and is provided for
use by its customers only. The contents of the manual are copyrighted
by Maple Systems, Inc.; reproduction in whole or in part, for use other
than in support of Maple Systems equipment is prohibited without
specific written permission of Maple Systems.
The copyright of EasyBuilder-5000 and its related software belongs to
Weintek Labs, Inc.
Applications Assistance
This manual is designed to provide the necessary in formation for
trouble-free installation and operation of your new Operator