Anritsu MS2687B - Manual (Page 11)

11
For development and production lines of
various high-frequency parts
Example of wide bandwidth signal measurement Example of narrow resolution bandwidth measurement
Suitable for analysis of broadband signals
Wide resolution bandwidth of up to 20 MHz
The MS2687B comes with a high-performance DSP as
standard. Various modulation analysis functions can be
added simply by installing measurement software. In
signal analysis mode, analysis by I/Q input (option 18
required) can be performed.
The resolution bandwidth is up to 20 MHz, which allows
the analysis of Wireless LAN signal.
High-speed measurement for construction
of automatic manufacturing lines
The MS2687B has a high sweep rate of more than 20
times/s. A slight change of the signal can thus be
accurately captured and measured at high speed. The
GPIB transfer speed of the measured data is as fast as
120 kbytes/s, making it approximately 10 times faster than
our conventional model. Use of the optional Ethernet
interface allows connection to a LAN for centralized
management and high-speed measurement, and thus
efficient construction of production lines.
High-speed sweep by FFT
Narrow resolution bandwidth (optional)
Optional narrow resolution bandwidth with FFT (fast
Fourier transform) is available (option 02, 1 Hz to 1 kHz).
This option permits state-of-the-art high-speed
measurement in a narrow band that used to be impossible
with the conventional sweep method.
For development and production lines of
various high-frequency parts