American Audio SDJ-1 - Manual (Page 17)

Press the in Button (12). This will set
the starting point of the SEAMLESS
LOOP. The in Button (12) LED will
blink.
Press play/pauSe Button (18) to acti-
vate playback mode.
Figure 13
Figure 12
BASIC OPErATIONS (CONT.)
© American Audio ® - www.americanaudio.us - SDJ-1™ Instruction Manual Page 17
9. CREATING AND PLAYING A SEAMLESS LOOP
A seamless loop is a sound loop that plays continuously without sound interruption. You can use this
loop to create dramatic effect in your mixing. This loop has no time limit and you could actually loop
the entire length of a card. You create a seamless loop between two continuous points of a track.
2)
Press the out Button (12) to set the
ending point for your SEAMLESS LOOP
(Figure 14). The in Button (12) and out
Button (12) LEDs will immediately begin
to flash rapidly indicating the SEAMLESS
LOOP mode has been activated.
Figure 14
3)
1)