Audio Authority 1361 - Manual (Page 9)

9
FREEZE
POWER
CONTRAST
BRIGHT
COLOR
SHARP
V-RESET
NTSC/PAL
COLORBAR SYS-RESET
POS/PAN
ASPECT
SIZE/EXP
1 2 3
4 5 6
7 8 9
CONTRAST, BRIGHTNESS, COLOR & SHARP: These keys CONTRAST, BRIGHTNESS, COLOR & SHARP: These keys
allow adjustment to be made to the labeled signal
allow adjustment to be made to the labeled signal
parameters. Press one of the keys, then use the arrow keys
parameters. Press one of the keys, then use the arrow keys
to make adjustments.
V-RESET: Restores factory default settings to the Contrast, V-RESET: Restores factory default settings to the Contrast,
Brightness Color and Sharpness parameters.
Brightness Color and Sharpness parameters.
NTSC/PAL: Selects the television standard to use on the NTSC/PAL: Selects the television standard to use on the
1361 output.
SYS-RESET: Restores factory presets to all parameters SYS-RESET: Restores factory presets to all parameters
(Overscan, NTSC, 4:3 Aspect Ratio, Signal Parameters and
(Overscan, NTSC, 4:3 Aspect Ratio, Signal Parameters and
CV/SV Output).
COLORBAR: Causes an internally generated color bar signal COLORBAR: Causes an internally generated color bar signal
to appear on the unit’s outputs.
5.1 RS-232 Operation
Software is included to allow control of the
1361 via a computer. The operation under
RS-232 control is explained in the following
pages.
5.1.1 Installing the Software
• Compatability: Windows 98/ME/2000/XP
• Place the CD in the drive and execute the
setup.exe function from the CD.
• The computer will probably update some
fi les causing the need to reboot after the
initial setup has fi nished. If this happens,
reboot and run setup a second time.
• Once fully installed, click the taskbar
menu (Start>Programs>Scan Converter)
to start the RS-232 software.
Pinouts for RS-232 Cable
1361
Connector
Pinout PC Serial
Connector
Pinout
1, NC 1, NC
2, TxD 2, RxD
3, RxD 3, TxD
4, NC 4, NC
5, GND 5, GND
6, NC 6, NC
7, NC 7, NC
8, NC 8, NC
9, NC 9, NC