Advantech HMI-640S - Manual (Page 79)

Chapter 5 CPC-2520 VGA/LCD Control Board 69
5.11 VGA display connector (CN3)
VGA display connector on CPC-2520 is a 12-pin FPC connector,
these VGA signals can be connected to client's system board
through a FPC cable. Client can design this cable by referring to
Cable layout diagram in chapter of design guide.
Table 5-3: VGA display connector (CN3)
Pin Signal
1 GND
2 +5V
3 +5V
4 GND
5 H SYNC
6 DDC1
7 V SYNC
8 DDC0
9 BLUE
10 RED
11 GREEN
12 GND
Note: The model number of the CN3 socket is
IL-FPR-12S-HFC (JAE Co., Ltd.)