Pfister VTP-E40W - Manual (Page 3)

E
N
G
L
IS
H
ENGLISH
ENGLISH
8 10
9
13
8 WAX SEAL INSTALLATION
Carefully turn Toilet’s Base (8A) on it’s side on top of a Secure Padded Surface (8B).
Place Wax Seal (8C) fi rmly into the outlet of the toilet bowl.
10 WATER SUPPLY CONNECTION
Use FTFE plumbers tape on threaded fi ttings according to manufacturer’s instructions.
Attach Large Hose Nut (10C) to Fill Valve Shank (10D) located on rear of Toilet Bowl.
Connect Short Hose Nut (10A) onto Water Supply Valve (10B). Turn on Water Supply
Valve (10B) by turning Handle (10E) counterclockwise.
11 INTERNAL PLUMBING
Tank comes pre-installed with fl ushing mechanism. (Some adjustments may be
necessary).
12 UNIT START UP
Turn on Main Water Supply Valve and check for leaks.
13 TANK LID INSTALLATION
Place Tank Lid (14A) on top of Tank (14B). Be sure Lid Lip (14C) covers the top of
Tank (14B).
9 TOILET BOWL INSTALLATION
A. Place Toilet’s Base (9A) onto Waste Outlet Hole (9B) with Tee Bolts (9C) passing
through Fixing Holes (9D).
B.
Place Plastic Washer (9E) and Metal Washer (9F) onto Tee Bolts (9C). Secure by
tightening the Mounting Nuts (9G) on to the Tee Bolts.
Do not over tighten!
Snap on Plastic Caps (9H) over bolts and nut as shown.
3
8A
8B
8C
10D
10A
10B
10E
10C
9F
9G
9C
9H
9E
9A
9A
9B
9C
9C
9D
OPEN
14A
14B
14C