Wright Serial 54956 and higher - Manual (Page 6)

5
1. Introduction
This mower is built to the highest standards in the industry. However, carelessness or operator error may
result in serious bodily injury or death. Accident and hazard prevention are dependent upon the awareness,
concern, wisdom, and proper training of the personnel involved in the operation, transport, maintenance, and
storage of the equipment. Make sure every operator is properly trained and thoroughly familiar with all of the
information in this manual before operating the equipment.
This machine is constructed only for mowing grass on lawns without obstacles such as stones, tree stumps
etc. The machine can also be used for other tasks when equipped with special accessory attachments; Grass
Gobbler, Velke Sulky and JRCO attachments. All other types of uses are incorrect. The manufacturer’s
directions concerning operation, maintenance and repairs must be carefully followed.
Lawn mowers and all power equipment, can be potentially dangerous if used improperly. Safety requires good
judgment, careful use in accordance with these instructions and common sense.
The machine must only be operated, maintained and repaired by persons familiar with the machines special
characteristics and who are also knowledgeable about the safety instructions. Use only approved repair parts
to maintain.
Accident prevention regulations, other general safety regulations, occupational safety rules, and traffic
regulations must be followed without fail.
Unauthorized modifications to the design of the machine will absolve the manufacturer from liability for any
resulting personal injury or property damage.
1.1 Technical Data
Weight of overall machine 48” = 820 lbs, 52” = 845 lbs, 61” = 870 lbs
Machine dimensions 48” = 59.25” L x 49” (61”) W x 46.5” H
(Chute Deflector Down) 52” = 60” L x 53” (65”) W x 46.5” H
61” = 62.5” L x 62” (74”) W x 46.5" H
Speeds Fwd. 9.5 mph, Rev. 5.5 mph
Power supply 12V DC