1 do’s and don’ts, 2 warnings, 3 important information – Wright Serial #59542 and higher User Manual

Page 7: 4 owner/user notice, Warning, Caution

Advertising
background image

5

WARNING

Do's

Don'ts

Read the operators manual before attempting to operate this machine

Don't disable safety switches

Use all PPE's, eye protection, ear protection and safety shoes

Don't operate when lightening is seen

Ensure all safety switches are operational

Don't lift with a forklift

Keep all shields and covers in place

Don’t change RPM's outside of operating limits

Clean flammable material from machine

Don’t remove the ROP's

Inspect fuel system and fuel lines for cracks, leaks and dryrott

Don’t tow or push

Inspect area to be mowed for hazards

Don’t operate on slopes when wet

Only operate in daylight

Don’t leave a running machine unattended

Mow safe distances away from drop-offs and other hazards

Don’t change the engines governor setting or overspeed the engine

Maintain a safe distance from people and pets

Don’t operate the machine wearing sandals, sneakers or any loose fitting clothes

Follow daily and weekly maintenance checklists

Don’t back up without being aware of what is behind the machine

Remain seated while operating

Don’t suddenly push in forward direction while machine is in a rearward motion

Observe traffic laws while driving machine from one location to another

Don’t operate a poorly maintain machine

Thoroughly inspect the machine after striking a foreign object

Don’t allow persons to operate this machine without reading the operator manuals

Turn off blades when not mowing

Don’t put hands or feet under any part of the machine while it is running

Slow down before turning

Don’t ever carry passengers

Stop engine before removing Grass Gobbler or cleaning under deck

Don’t discharge material towards anyone

Use caution when loading or unloading the machine onto a truck or trailer Don’t operate the machine if you are sick, fatigued or under the influence of alcohol or drugs

Belt/pulley covers on cutter deck

Low center-of-gravity (CG) to improve stability on hills

Rollover Protection System (ROP’s) must be pinned securely in upright position and used with seat belt.

1.2.1 Do’s and Don’ts













1.2.2 Warnings!

These warnings are provided to improve safety and should be carefully read before using or maintaining the
machine.







1.3 Important Information

It is vital that these instructions are available to machine users. It is also important to retain with the machine
if the machine is sold or transferred to another user.


1.4 Owner/User Notice

The owner’s/user’s obligation is to instruct themselves and all potential users in the safe operation
of this equipment and be sure they read and follow the instructions in this safety manual and other
material provided by Wright Manufacturing, Inc. before using or allowing others to operate the
equipment. Do not operate this unit unless you carefully read, understand and follow the assembly,
installation, and safety instructions contained in this manual and the warning decals provided on the
unit. Do not allow other persons to use this unit unless you make sure they carefully read,
understand and follow these instructions. Never allow children to operate or play on the unit.

WARNING

This symbol with the word “WARNING”
indicates a potentially hazardous situation
which, if not avoided, could result in death
or serious injury.

CAUTION

This symbol with the word “CAUTION”
indicates a potentially hazardous situation
which, if not avoided, could result in minor
or moderate injury.

Advertising