Ncautions for safely applying the device – Yokogawa YFGW510 User Manual
Page 6
6
<Read Me First>
IM 01W02E01-11EN
n
Notes on Attached Software
l
Before opening the media package, read YFGW510 Software License Agree-
ment. Once the package is opened, it is thought that the contract is agreed.
l
Yokogawa assumes no responsibilities for this software except as stated in
the warranty.
l
This software is used with this product exclusively. This can be installed in the
computer which connects with this product.
n
Cautions for Safely Applying the Device
l
EMC Conformity Standards
EN61326-1 Class A, Table 2 (For use in industrial locations), EN55011 Class A, Group 1,
EN61000-6-2
This instrument is a Class A product, and it is designed for use in the industrial environment.
Please use this instrument in the industrial environment only.
l
Low Voltage Directive
Applicable standard: EN61010-1
(1) Pollution Degree 2
“Pollution degree” describes the degree to which a solid, liquid, or gas which deteriorates
dielectric strength or surface resistivity is adhering. “2” applies to normal indoor atmosphere.
Normally, only non-conductive pollution occurs. Occasionally, however, temporary conductivity
caused by condensation must be expected.
(2) Installation Category I
“Overvoltage category (Installation category)” describes a number which defines a transient
overvoltage condition. It implies the regulation for impulse withstand voltage.
“I” applies to electrical equipment which is supplied from the circuit when appropriate transient
overvoltage control means (interface) are provided
l
Regulatory Compliance for Radio and Telecommunication
Please confirm that a installation region fulfills a standards, require additional regulatory informa-
tion and approvals, contact to Yokogawa Electric Corporation.
• Radio and Telecommunications
Terminal Equipment Directive (R&TTE)
We, Yokogawa Electric Corporation hereby declare that this equipment, model YFGW510 is in
compliance with the essential requirements and other relevant provisions of Directive 1999/5/
EC.
The CE declaration of conformity for R&TTE for this product can be found at
http://www.field-wireless.com/