Yokogawa FieldMate - Manual (Page 369)

<Appendix H FieldMate Provisioning Device Tool>
App.-48
IM 01R01A01-01E 9th Edition : May 31, 2013-00
 COM Port Setting of Infrared Adapter
At the main window, select the [Tool] menu and then [Infrared adapter setting], and set the
COM port of the Infrared adapter on the PC. Check the number of the COM port using Device
Manager.
In this menu, the window will be displayed as shown below.
In the case of products recommended for this software, the COM port of the infrared adapter can
be checked. Set the COM port accordingly.
App.H04E.ai
Figure App.-H-4
TIP
The COM number of the modem may change according to the using state of the PC (increase/decrease in the
number of COM devices including USB devices). The COM number should be checked.
 Gathering Device Information (Acquisition of Device Information)
Put the infrared port of the adapter and the infrared receiving port on the field wireless device
close together, and click the [Gather Device Information] button of this application.
During the communication, a progress bar will be displayed as shown below.
App.H05E.ai
Figure App.-H-5
When the message dialog is displayed as shown below, the device information has been
acquired correctly.
App.H06E.ai
Figure App.-H-6