Avaya P880 - Manual (Page 43)

A-9 610-0184-095 June 14, 2001
■
To assign a weight of 5 to queue 4, enter:
> queue 4 weight 5
■
To assign a weight of 6 to queue 5, enter:
> queue 5 weight 6
■
To assign a weight of 7 to queue 6, enter:
> queue 6 weight 7
■
To assign a weight of 8 to queue 7, enter:
> queue 7 weight 8
Displaying the Queue Service Settings
Command
Use the show queue-service command to display the settings for
queue service. The correct syntax for this command is:
> show queue-service {<slot>|<mod-port-range>}
[...,{<slot>|<mod-port-range>}]
where
<slot> is a slot number
<mod-port-range> is 0-7
If you specify this parameter, then the settings for all of the ports on
the module in slot
<slot> are displayed.
<slot-swport-range> is a slot and port range in the form of 3/1
or 3/1-5 . If you specify this parameter, then the queue service
settings for ports <swport-range> on the module in slot <slot>
are displayed.
Examples
To display the queue service settings for port 1 on the module in slot
3, enter:
> show queue-service 3/1