Yokogawa Touch Screen GP20 - Manual (Page 32)

2-14
IM 04L61B01-02EN
The example below shows the configuration window that appears when you select Display
settings - Group settings - Channel set.
Procedure
1
Select a range of channels as shown below.
Drag to select a rectangular area.
Selection can be made across different setup item blocks.
Click a label in a cell to select a single cell.
2
While holding down Ctrl, click any of the check boxes in the selected range, or click the
On/Off button to select or clear all the check boxes in the selected range.
Click while holding down Ctrl, or click On/Off to
select the check boxes in the selected range at once.
All check boxes in the selected area are selected.
Click again to clear all the check boxes.
2.3 Editing Setup Data