Yokogawa Button Operated DX2000 - Manual (Page 21)

1-10
IM 04L42B01-01E
Status Display Section
The following information is displayed in the status display section during operation mode
or setting mode.
Memory sampling status
Error in internal memory.
Contact your nearest YOKOGAWA dealer for repairs.
Displayed when any alarm is activated.
Blinks when there are alarms that are
occurring but have not been acknowledged.
The status assigned to the status output
(/F1 or /F2 option) is occurring.
CF card icon
Keys are locked.
E-mail transmission is enabled.
White icon:Computation started
Yellow icon:Computation data dropout occurred
CF card is being accessed.
Waiting.
Light blue icon: CF card in the slot is not
recognized. Remove and reset it.
CF card error.
Carry out the procedure below to reset the CF card icon to
normal.
• Remove the CF card, and then reinsert it.
• Replace the CF card with a normal one.
• Format the CF card on the DX (the data on the CF card
will be erased).
The green level display indicates the amount of
CF card used. If Media FIFO* is not enabled and
the free space on the CF card falls below 10%,
the level indicator changes to red.
* See section 1.4, in the DX1000/DX1000N User’s
Manual. Media FIFO is a function available on
release number 2 or later.
If the “batch number-lot number” exceeds 20
characters, the “date and time” position is used to
display the “batch number-lot number.”
Memory sampling icon
Memory sampling
stopped
Memory sampling
in progress
Name of the user logged in
Date and time
Displayed in yellow while the time is being corrected.
Display name or group name
For all channel display on the trend display,
“All” is displayed.
Data type
Display data
Event data
Memory sampling progress
Displays the progress using a green bar graph. The frame indicates the file
save interval (display data) or the data length (event data).
Displays the remaining memory sampling time for the left bar graph.
When using the login function
When using the batch function
Alarm icon
Status icon
Computation icon (/M1 or /PM1 option)
Date and time
Name of the user logged in
When using the login and batch functions
Date and time
Date and time
Display name
(Red)
(Green)
Batch name and the display
name are shown alternately.
Batch name and the display
name are shown alternately.
User locked icon (/AS1 option)
Displayed when the user is locked.
All alarms have been released after they
have occurred, but there are alarms that
have not been acknowledged.
Bar Graph
When event data recording is set to pretrigger, the DX will start recording pretrigger data
after you press the START key. “Waiting” appears in the bar graph (release number 3 or
later). At this time, the progress bar will turn orange. After the pretrigger time elapses,
the length of the bar fixed at that point. However, the relevant data is updated until the
trigger condition is met. When the trigger condition is met, the bar turns green, and data
is recorded after the data in the pretrigger section.
1.3 Display