Yokogawa DAQWORX - Manual (Page 12)

11 IM WX1-01E
. Connecting and Disconnecting Communication
with a Target Device, and Entering Port
Numbers
Connecting to a Target Device
You can open a connection for communications with a particular device on the network,
then begin downloading images.
1. Choose Comm. > Connect from the menu bar.
Note
When distributing image data, set the software that will act as the client.
Closing the Connection
1. Choose Comm. > Disconnect from the menu bar.
All connections are cut.
Entering the Port Number for Connection with the Client
Generally you do not need to change these numbers. Change only if the initial values
are not appropriate for your network. When changing settings, enter values that are
allowed on your network, and that match those on your server. The default value is
50290.
1. Choose Comm. > Port No. from the menu bar.
The Port No. dialog box opens.
2. Enter the port number.
Note
The new port number setting will take effect the next time you start the instrument. Restart the
software to activate the new settings.