Sending the parameter setting – Yokogawa PR300 Power and Energy Meter User Manual
Page 17
Advertising
<Toc> <Ind>
<2. Configuring the Power and Energy Meter>
2-8
Sending the Parameter Setting
Send the parameter setting data to the device.
1
. Set the parameter setting, and then click Send Parameter Setting.
A confirmation dialog box for sending the setting opens. (The figure below shows
the Example Screen of the PR300.)
2
. Click OK.
The sending starts. When the sending of the parameter setting is complete
correctly, a message appears to indicate it.
3
. Click OK.
IM 77C01Y01-01E
Advertising