Sterling MS - Manual (Page 6)

— 6 —
Figure 1 - Hoisting of Make-Up Air Unit (Single Furnace)
Without Lifting Brackets
Figure 2 - Hoisting of Make-Up Air Unit (Single Furnace)
With Lifting Brackets
Figure 3 - Hoisting Make-Up Air Handler Unit
Figure 4 - Hoisting Double Furnace Unit
Figure 5 - Hoisting Triple Furnace Unit
Refer to Figures 3, 4 and 5 for dual/triple furnace Make Up
Air rigging requirements. Dual/triple furnace units ship to
the site in two sections (Figure 3 is the air handler section;
Figures 4 and 5 are the furnace sections).
(4) Lifting Point
Locations (2) At Each
End Of Air Handler Unit
Use Spreader Bars
To Prevent Damage
To Units
D6558
D6559
(8) Lifting Point
Locations (4) On Each
Side Of Duct Furnace Unit
Use Spreader Bars
To Prevent Damage
To Units
(6) Lifting Point
Locations (3) On Each
Side Of Duct Furnace Unit
Use Spreader Bars
To Prevent Damage
To Units
D6558