Thermolec Application &Technical Notes - Manual (Page 2)

Certificate of Compliance
Certificate Number: LR 30551-27
Revision: LR 30551-35
Issued to: THERMOLEC LTÉE/LTD
2060 Place Thimens
St-Laurent, Québec
H4R 1L1
The products listed below are eligible to bear the CSA Mark
NOTE: The "NRTL/C" indicator also appears adjacent to the CSA Mark.
Issued by: G. Raymond, Eng.
Montréal, QC Canada
Signature:
PRODUCTS
CLASS 2811 03 - HEATERS - Air - Stationary Type
CLASS 2811 83 - HEATERS - Air - Stationary Type -
CERTIFIED TO U.S. STANDARDS
Duct heaters with Sheathed Elements, for horizontal or vertical air flow, rated up to 600V, 60Hz, 1 or 3 phases, 1000KW
and less: With temperature limiting controls, Series FT (flange mount) and ST (slip-in); without limit controls, series TFE
(flange mount) and TSE (slip-in).
APPLICABLE STANDARDS
CSA Std C22.2 No. 155-M1986 - Electric Duct Heaters
UL std. No. 1996 - Electric Duct Heaters
*The "NRTL/C" indicator adjacent to the CSA Mark signifies that the product has been evaluated to the applicable ANSI/UL and CSA
Standards, for use in the U.S. and Canada. NRTL, i.e. Nationally Recognized Testing Laboratory, is a designation granted by the U.S. Occupational
Safety and Health Administration (OSHA) to laboratories which have been recognized to perform certification to U.S. Standards.
DQD 507 Canadian Standards Association Offices: Montréal, Toronto, Edmonton, Vancouver, Tokyo, Hong Kong
THERMOLEC