Pro-Cut PFM 9.2 - Manual (Page 7)

Perfect brake job. Every time.
PFM 9.0 / 9.2 DRO SAFETY MANUAL
➣ Check that all cords are fully seated in their sockets.
➣ Seat cord firmly in socket if it is loose.
➣ Do not disable the machinery/earth grounding pin on the cord.
➣ Do not use with a wall socket without earth ground.
➣ Do not use any cord or adapter which would eliminate the
connection to earth ground.
➣ Electricity can kill!
Use caution when moving the lathe and trolley around the shop.
Your shop area should be level and free of obstruction. Move the lathe
and trolley slowly, being certain not to jam the wheels on such things as
hoses, cords or open grates. Do keep all vehicle adapters attached to the
base of your trolley when not in use. Do put the lathe in the lowest
position prior to moving it around the shop. Do not use in a shop without
a smooth, level floor surface. If the lathe topples it can cause property
damage or injury, possibly death.
Never use lathe without the accompanying trolley. The lathe and trolley are a uni-
fied system. The trolley is designed to safely support your lathe and to prevent it from
rotating during the cutting procedure. Use of a lathe without the accompanying trolley
can cause harm to the equipment, the operator or those nearby.
Always use the lathe on vehicles that have been properly hoisted and
supported. This lathe is meant for use in professional automotive repair facilities with
fixed hoists. The lathe puts forces on a vehicle which could cause the vehicle to shift,
topple or fall down if not properly supported. Serious injury or death could result.
7 10 TECHNOLOGY DRIVE #4, W. LEBANON, NH 03784 USA P. 800.543.6618 / 603.298.5200 FAX. 603.298.8404 [email protected] WWW.PROCUTUSA.COM 10 TECHNOLOGY DRIVE #4, W. LEBANON, NH 03784 USA P. 800.543.6618 / 603.298.5200 FAX. 603.298.8404 [email protected] WWW.PROCUTUSA.COM