Welcome to the pro-cut team – Pro-Cut PFM 9.0 User Manual

Page 8

Advertising
background image

PG /

ØØ8

800.543.6618

Congratulations on your purchase of the

PRO-CUT 9.0 DRO, the world’s fastest and most accurate computer-

ized on-car brake lathe.

For many years, on-car lathes were used only for rotors that were difficult to remove. Due to current trends,
virtually all auto manufacturers now require or recommend the use of on-car technology to match every rotor
to every hub. By matching a rotor to the hub, the chance of a vehicle returning for a lateral run-out induced
brake pedal pulsation is virtually eliminated. There is simply no better way to refinish and match a rotor than
with the patented ROTOR MATCHING SYSTEM.

The following pages are designed to guide you through set-up, operation, and maintenance of your lathe. We
also recommend that you view the enclosed training video.

If you have any questions along the way, please call us. Our technical support team is standing by from 8
a.m. to 5 p.m. Eastern time. Or browse our website for technical information and tips: www.procutusa.com.

WELCOME TO THE PRO-CUT TEAM.

INTRODUCTION

Advertising