MAHLE RTI Laser 4 - Manual (Page 3)

Page 2
The Laser 4 Plus is a four-wheel alignment system that uses three Class II laser products. These lasers have a
maximum output power of 5.0 milliwatts. The laser tubes meet all government safety standards, although
common sense dictates that one should not stare directly into the beam. Laser precision is unaffected by light,
temperature, and the concentrated light beam is clearly visible anywhere. The following precautions have been
taken to insure the safety of the system (See Fig. 1):
1) Serial Number label is located on underside of casting on power supply cover. Each serial number is
recorded for future identification.
2) LED light comes on as soon as power is activated to laser beam.
3) Slide cover must be slid toward casting to uncover laser beam (LH Toe Gauge only).
4) Caution decals are located on the unit.
5) Flip-open protective cap protects laser unit when not in use.
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.