PreSonus AudioBox 44VSL - Manual (Page 30)

26
PreSonus AudioBox ™ 22/44VSL
Ov
er
view
Hook
up
Connec
ting
to a
Comput
er
Sof
tw
ar
e: V
irtual
StudioLiv
e
SL Remot
e,
and S
tudio O
ne Ar
tist
Tut
orials
Technical
Informa
tion
Troubleshooting
and W
arr
an
ty
4 Software: Virtual StudioLive and Studio One Artist
Sof
tw
ar
e: V
irtual
StudioLiv
e
and S
tudio O
ne Ar
tist
26
Equalizer On/Off Turns the Equalizer On and Off for the Selected Channel or Bus.
This button engages or disengages the equalizer for the selected channel
or output bus. It will illuminate to indicate that the equalizer has been
enabled.
The EQ is available for all input and output buses.
Low EQ On/Off Button Activates Control for the Low Band EQ for the Selected Channel or Bus.
This button activates control of the equalizer’s Low band for the selected
channel or bus. The button will illuminate to indicate control is active.
The Low EQ band is available for all input and output buses.
Low EQ Frequency Control Sets the Center Frequency for the Low EQ Band.
The center frequency is the middle of the passband (the mean) between
the lower and upper cutoff frequencies that define the limits of the band.
You can adjust the center frequency from 36 to 465 Hz.
Low EQ Gain Control Sets the Gain Attenuation or Boost of the Center Frequency.
This control sets the gain cut or boost at the center
frequency for the Low band. The level of the center
frequency can be set between -15 and +15 dB.
Low Shelf EQ Button Turns On the Low Shelving EQ for the Selected Input or Output Bus.
When the Shelf button is not engaged, the Low band is semi-parametric.
Enabling the Shelf button turns the Low band into a low shelving EQ that
alters, by a fixed amount, a band of low frequencies at and below a
user-selected shelving frequency.
Power User Tip: A low shelving EQ is like a bass-control knob on a stereo. In this
mode, the Center Frequency control selects the shelving frequency.
Mid EQ On/Off Button Activates Controls for the Mid EQ for the Selected Input or Bus.
This button activates the controls for the equalizer’s Mid band for the
selected input or output. The button will illuminate to indicate control
is active.
The Mid EQ band is available for all input and output buses.
4.1 Virtual Studio Live