PreSonus Studio Channel - Manual (Page 11)

CONTROLS AND CONNECTIONS
9 | PreSonus 2007
 Mid Band Q. Sets the frequency range for the Mid Band EQ. The Frequency knob sets the center of
this range.
 High Band Frequency. Sets the Center Frequency of the “Q” or frequency range width of the High
Band EQ. You can adjust the center frequency from 2 to 20 kHz.
 High Band Peak Button. By default, the High EQ is set as a shelving EQ. When the peak button is
enabled, the High Band EQ becomes a standard peak equalizer with a fixed Q of 0.7.
 High Band Gain. Sets the Gain attenuation or boost of the Q. The level of the center frequency can be
set between -10 and +10 dB.
2.1.4 Master and VU Meter
 Power Button. This button turns your Studio Channel On and Off. When your Studio Channel is
powered on, this button will illuminate.
 Master Level. Adjust the overall output volume of the Studio Channel
 VU Meter. The analog VU meters the output level of your Studio Channel. When the GR>Meter
button in the compressor section is enabled, the VU meter will show the amount of Gain Reduction.