PreSonus Monitor Station - Manual (Page 22)

CONTROLS & CONNECTION
20
3.2.2 Outputs
• Main. Connects the Main bus to a stereo device. The Main L/R outputs derive their signal directly
from the Main Source selection and are not affected by any of the Main bus level controls.
•
Cue. Connects the Cue bus to a stereo device. The Cue L/R outputs derive their signal directly
from the Cue Source selection and are only affected by the Cue Input Level control knob.
•
A. Connects the Main-Speaker A bus to a stereo device. The Speaker A L/R outputs are only
active when the Speaker A button is active.
• B. Connects the Main-Speaker B bus to a stereo device. The Speaker B L/R outputs are only
active when the Speaker B button is active.
•
C. Connects the Main-Speaker C bus to a stereo device. The Speaker C L/R outputs are only active
when the Speaker C button is active.
3.2.3 Power
• AC Power Input. Connects the Monitor Station’s included 16 VAC power supply.
•
Power. Turns the Monitor Station On or Off. The Monitor Station is on when the Power switch is
in the up position ( | depressed ) and off when this switch is in the down position ( O depressed ).
Designed by PreSonus in the USA.
M anufactured in PRC.
16VAC
10Watts
O