PreSonus FireStudio - Manual (Page 24)

GETTING STARTED
21 | PreSonus 2008
2.3.2 Full Band Setup Using the MSR in Track Mode
Please note: This setup can be used with or without an MSR connected. This example implies that seven monitor mixes have
been created in the FireStudio Device window and routed to the 8 General Purpose outputs of the FireStudio and 4 of the
DAC outputs on the DigiMax FS in stereo pairs. The seventh mix is assigned to an unused output and copied to the Main
Outputs for control room monitoring (see below). By connecting an ADAT cable to both the input and the output of the
DigiMax FS, it can be used to expand the outputs of the FireStudio as well as to add more analog inputs.