5 final pre-sound check check – Nexo RS User Manual

Page 45

Advertising
background image

RS15

S

YSTEM

C

HECK

L

IST

Page

45/58

-

when listening from behind the system, switch the front drivers in and out. You should hear a
reduction in the LF range when the both front and rear drivers are on as compared to when the
rear drivers only are on;

-

When listening from the front, you should hear a strong increase in the LF range when
connecting the rear drivers.

• Raise the bumper, attach the next series of modules and repeat the above checks.
• Make sure that these series of modules sum properly with the modules above them.

9.5 Final Pre-Sound Check Check

• Play a CD track (preferably generous and periodic in the LF content) on the SUB output, mono

left, mono right and then both sides:

-

both sides must sound strictly identical when listening at the center;

-

level must not decrease at the center when playing left and right simultaneously as opposed to
one side only.

• Play the same CD track on the MAIN system, on the SUB system, then on both:

-

Inverting polarity on one of these outputs – MAIN or SUB - should always result in a massive
difference near the crossover point.

Advertising
This manual is related to the following products: