Nexo RS User Manual
Page 10
Page 10/54
I
NTRODUCTION
As for all NEXO systems, the RS18 is controlled, powered and monitored by dedicated NEXO
TDControllers:
• NX242-ES4 Digital TDController provides comprehensive control of RS18 loudspeakers in multiple
configurations. It allows Ethersound
TM
digital audio networking, as well as remote control for all units
in the network. It has 2 analogue / 4 digital inputs and 4 analogue / 4 digital outputs;
IMPORTANT : NX242 must be equipped with NX-Tension Card to access RS18 directional
mode setups
• NXAMP4x1 and NXAMP 4x4 are Powered Digital Controllers, providing full control and amplification
for RS18 in multiple configurations. Both devices feature 4 analogue inputs and 4 speaker
outputs.When equipped with optional card, 4 digital inputs in Ethersound
TM
digital audio network
format as well as remote control for all units in the network become available.
For a complete description of these controllers, please refer to User Manuals. The NX242 and NXAMP
DSP algorithms and parameters are fixed in software and updated regularly: Please consult the NEXO
web site (www.nexo.fr) for the latest software releases.
Please devote your time and attention to reading this manual. A comprehensive understanding of RS18
specific features will help you to operate your system at its full potential.
GeoD Passive mode
Crossover 80Hz