Nexo NUAR - Manual (Page 54)

MENU DESCRIPTION
By depressing the cancel sign (‘x’) the display is now back to default mode; if the chosen
setups are equivalent to a known “Nexo setup”, then the default display is the classical
one, like displayed on the following picture:
If the chosen setups does not match any of the NEXO four channels setups (including
chosen crossover frequency) the display will show the speaker selected for each output.
Input Patch
This menu allows changing the inputs channels patched on the outputs channels of the
NXAMP. To access the Input Patch menu, go to the Option menu, and select the sub-menu
2. Input Patch.
By default and depending on the selected speaker setup selected, some or all of the four
inputs will be patched to the outputs. For example, 4 independent channels setups (like 4 x
PS15) will use each analog input patched to each output, but 4 way active setups (like
Alpha) will use only one analog input patched to all the outputs.
Most of the time, the user can freely change the way inputs are patched to the outputs.
However, in some special circumstances, like cardioids setups for example, it is mandatory
PAGE 54 OF 140