Stewart Audio AV30MX-2 - Manual (Page 4)

6 7
2 Setup
2.1 Setup Precautions
CAUTION: Before installing your amplifier, make sure that
you have read the Important Safety Precautions at the be-
ginning of this manual.
2.2 Amplifier Installation
The AV30MX-2 incorporates a number of different mounting options in
order to fit your installation needs.
2.2.1 Pole-Mounting
The AV Series of amplifiers is Stewart Audio’s first line of pole-
mountable amplifiers. The AV30MX-2 has mount holes on both the top
as well as the side of the unit which can be used with the AV-Pole
bracket available from Stewart Audio.
Part Number: AV-Pole
2.2.1 Universal-Mount Installation
The AV30MX-2 also has a universal bracket available which allows the
unit to be mounted against a wall or under a table. Two screws are
included in the kit which will affix the bracket to the top or the side of
the unit. Once this is done, two holes are available for mounting the
unit where desired.
CAUTION: Use only the screws provided in mounting
brackets to the amplifier. Do not overtighten.
Part Number: AV-Bracket
AV Series
AV
-30MX
-2