PrehKeyTec GmbH - Manual (Page 4)

Programming of our example key D01 on several layers
On the highlighted key position D01 we would like to have the following programming:
• Normal-Layer!!!{Return}
when "nothing else is pressed", i.e. when no special status is active
• Shift-Layer!!!{Return}
when "Shift active", i.e. D01 pressed together with <Shift>
• Control-Layer!!!{Return}
when "Control active", i.e. D01 pressed together with <Control>
Just double-click the key position D01 – then you will see the following programming dialogue:
Figure 7
Normal Layer:
Step1: Select the "Normal" tab.
Step2: Enter the sequence to be output during
"Normal layer active" into field "key assignment":
Normal Layer!!!{Return}
Shift-Layer:
Now select the "Shift-Layer" tab. Repeat step 2
of above and just enter:
Shift-Layer!!!{Return}
Control-Layer:
Now enter the corresponding sequence for the
"Control-Layer":
Control-Layer!!!{Return}
As a third step you can configure "Local key
attributes" for each key programming. Please
also see the annotations to the programming
dialog. For example you can configure a key
click as an acoustic feedback of the key press.
The key function {Return} can either be entered
manually, or by selecting it from the "Keys>>" list
on the left side.
PrehKeyTec GmbH Quickstart WinProgrammer - Apr 01 2011 Page 4/22