PrehKeyTec MCI TouchKey - Manual (Page 13)

<Layername>.xml
These files contains the configuration for the layouts. Keys can be programmed in
layouts but graphics and text will always be configured in a separate file for each.
Description of the Element
<Layer>
This element contains as an attribute the name of the XML-Schema. The schema
checks the validity of <Layername>.xml. If there is an error, the TouchKey Server
automatically stops and out puts an error message.
Example: <Layer xmlns="http://tempuri.org/layer.xsd">
<name>
Sets the name of the layout. The name is same as the file name without the ".xml"
ending.
Example: <name>tables</name>
<index>
Is not used.
Example: <index>0</index>
<keytostart>
This is a POS-Key, which can directly bring up a layer on the screen. These keys can
be programmed using the WinProgrammer software on the keyboard section of the
MCI TouchKey. If this is not needed, please enter the value 0. The value range is 0-
128
Example: <keytostart>1</keytostart>
<buttondata>
This describes all the parameters for a key on a layout.
<beep>
This configuration sets a click for the button in a layout. This can be turned on or off.
The possible values are: true, false.
Example: <beep>true</beep>
PrehKeyTec GmbH MCI_TouchKey_TechDoc_RevC_en.doc - 2011-02-09 Page 13/40