ReadyLIFT Jeep Wrangler JK 2007-2014, Adj. Lift 1.0-2.0"" - Manual (Page 3)

www.ReadyLIFT.com
Phone (702)410-2300
Installation Instructions (66-6095, T6-6091 & T6-6092 )
Securely raise vehicle off ground and remove (4)wheels Support front axle and remove upper trac bar bolt.
Loosen (2) front transfer case skid plate bolts. Disconnect dr./pass. lower front swaybar end links
Disconnect and remove front lower shock hardware. Carefully lower front axle enough to remove front spring
Assemble the desired amount of lift (1.0”, 1.5”, 2.0”) based on the vehicle’s stance.
Note: Config. C requires installation of (4) countersink assembly bolts.
Config. A = 1.0” Lift Config. B = 1.5” Lift Config. C = 2.0” Lift