ReadyLIFT GMC Envoy SST Lift Kit, 2002-2009, 2WD & 4WD - 2.0F/1.0"R" - Manual (Page 4)

ReadyLift
®
(Part# 69-3065)
2002-2008 Chevy Trailblazer/GMC Envoy
Installation Instructions
Revised
12-30-08
ReadyLift Suspension, Inc.
3201 W. MacArthur Blvd, Santa Ana, CA, 92704
T o l l F r e e ( 8 8 8 ) 9 2 2 - 2 2 9 4 Fa x 7 1 4 -8 6 2 -2 9 7 2
Please read instructions thoroughly and completely before beginning installation.
Check www.Readylift.com for any installation instruction updates
Installation by a trained mechanic is recommended.
Raise the jack to compress the suspension, Reconnect the
upper ball joint to the upper control arm. Insert the retaining
bolt and nut, tighten to 42 ft-lbs.
13.
Install the strut into the OEM location. The Readylift kit has
three mounting studs that locate into the existing holes in the
strut tower. Loosely install the upper strut mounting nuts.
Lower the jack and install the lower strut mount and nut but do
not tighten. Tighten the strut arm pinch bolt. Reinstall the
lower sway bar end link.
11. 12.
Tighten the upper strut mounting nuts to 42 ft-lbs.
Tighten the lower sway bar end link nut to 74 ft-lbs.
Reconnect the ABS line at the knuckle and the upper
control arm. Repeat steps 1-13 on opposite side.
When completed, install the factory wheels and tires
and lower vehicle to the ground. Bounce the front of the
vehicle to settle the suspension. Tighten the lower strut
mount nut to 175 ft-lbs. Double check all hardware for
proper torque. Re-torque all hardware after 500
miles.
14.