ReadyLIFT Dodge Ram 1500, 2009-2012, 4WD Only - 2.5F/1.5"R, SST Lift Kit" User Manual
Page 4
.
Next, reinstall strut assembly into vehicle and
secure top with new hardware, OE on the
lower. Carefully raise lower control arm into
pockets and torque hardware to spec. Re-
connect ABS line by routing it over the upper
a-arm away from new bump stop bracket.
Reconnect sway bar end link. Repeat process
on opposite side. Recheck all hardware and
align vehicle.
www.ReadyLIFT.com
Phone (702)410-2300
Installation Instructions (69-1030)
Drop lower control arm out from frame pockets.
Now, remove upper strut mounting nuts.
Remove strut assembly from vehicle.
Attach new strut extension with OE hardware.
Attach bump stop/bracket to frame hole w/ new hardware
Align bump stop under a-arm, fit inside washer plate to frame
Attach new hardware and torque to spec.