ReadyLIFT Jeep Wrangler JK 2007-2014, 4.0F/3.0"R SST Coil Spring Lift Kit" User Manual
Page 5
Advertising
www.ReadyLIFT.com
Phone (702)410-2300
Installation Instructions (69-6400)
Slightly lift rear axle and remove upper trac bar bolt.
Next, remove rear upper shock bolts.
Carefully lower rear axle and remove rear coil springs.
Install new upper trac bar bracket with provided hardware.
Install rear bump stop extensions with provided hardware.
Install new coil springs and OE isolators and raise axle.
Install upper shock extensions with provided hardware.
Reinstall rear brake calipers and torque to spec.
Note: crush sleeve
Advertising