ReadyLIFT Jeep JK Wrangler, 2007-2014 - Adjustable Rear Trac Bar User Manual
Page 3
Advertising
www.ReadyLIFT.com
Phone (702)410-2300
Installation Instructions (77-6000)
Remove rear track bar bolt at axle.
Remove hardware at frame,
and drop bracket if necessary
.
Remove track bar and ReadyLIFT rear drop bracket
Assemble track bar bushings, sleeves and zerk fittings.
Use assembly lube on bushings and sleeves.
Straight zerk goes on short end and 90 degree on longer end
Reinstall adjustable track bar in reverse of removal steps.
Adjust track bar under rear of vehicle and tighten jam nuts.
Advertising