STI 9714 - Manual

CEILING STROBE
19033 ANCHOR
(4) PROVIDED
19013 #10 x 1-1/2 in. SCREW
(4) PROVIDED
19020 CLAMP
(4) PROVIDED STROBE AND BACKBOX
22.5°
3.54 in.
(90mm)
8.26 in.
(210mm)
STI-9711 STI-9714
6.23 in.
(158mm)
8.55 in.
(271mm)
CEILIING
SPEAKER/STROBE
4” SQUARE
ELECTRICAL BOX
STI-1286
BACKPLATE
CEILING SPEAKER/STROBE
MOUNTING PLATE
WIRE GUARD CLAMPS
INSTALLATION OF STI-9711 AND STI-9714 HORN/STROBE/SPEAKER DAMAGE STOPPER ®
All specifications and information shown were current as of publication and are subject to change without notice.
9711 AND 97014 JULY2010
Safety Technology International, Inc.
2306 Airport Road • Waterford, Michigan 48327-1209
Phone: 248-673-9898 • Fax: 248-673-1246
Toll Free: 800-888-4784 • E-mail: [email protected]
Web: www.sti-usa.com
Safety Technology International (Europe) Ltd.
Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch
Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999
Fax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only)
E-mail: [email protected] • Web: www.sti-europe.com
FIGURE 1
INSTALLATION INSTRUCTIONS
1. Place wire guard over strobe as shown in Figure 1. Make
sure wire guard is rotated to maximize light exposure.
2. Place clamps in recommended position as shown. Mark
clamp hole locations on wall.
3. Drill (4) 5/32 diameter holes 1 ½ in. deep. If using 19033
anchors, drill (4) 11/32 diameter holes 1 ½ in. deep.
4. Insert anchors and/or screws and tighten.
WHEN USING MOUNTING PLATE
1. Place ceiling speaker/strobe mounting plate onto 9711
backplate and anchor to 4.0 square electrical box using
the (2) #6-32 screws. Backplate must be orientated as
shown to mount correctly.
2. Connect all wires per installation instructions.
3. Mount ceiling speaker/strobe to ceiling speaker/strobe
mounting plate per installation instructions.
4. Mount wire guard over ceiling speaker/strobe and attach
to backplate using the (4) clamps and screws.
FIGURE 2
LIGHT DE-RATING FACTOR
System Sensor (SCR, SCW, SCRK, SCWK, SCW-CLR-
ALERT,PC2R, PC2W, PC4R, PC4W, PC2RK, PC2WK,
PC4WK,SPSCWV, SPSCR, SPSCR-SP, SPSCR-PG, SPSCW,
SPSCW-SP, SPSCW-PG, SPSCRV, SPSCRV-PG, SPSCWV,
SPSCWV-SP and SPSCWV-PG, SPSCWK, SPSCW-CLR-ALERT)
System Sensor (SCRH, SCWH, SCRHK, SCWHK, PC2RH,
PC2WH, PC4RH, PC2RHK, PC2WHK, PC4WHK, SPSCWHV,
SPSCRH, SPSCRH-SP, SPSCRH-PG, SPSCWH, SPSCWH-
SP, SPSCWH-PG, SPSCRVH, SPSCRVH-SP, SPSCRVH-PG,
SPSCWHV-SP SPSCWHV-PG, SPSCWHK)
Light
Loss %
0%
0%
STI-9711 STI-9714
CEILING STROBE
19033 ANCHOR
(4) PROVIDED
19013 #10 x 1-1/2 in. SCREW
(4) PROVIDED
19020 CLAMP
(4) PROVIDED STROBE AND BACKBOX
22.5°
3.54 in.
(90mm)
8.26 in.
(210mm)
STI-9711 STI-9714
6.23 in.
(158mm)
8.55 in.
(271mm)
CEILIING
SPEAKER/STROBE
4” SQUARE
ELECTRICAL BOX
STI-1286
BACKPLATE
CEILING SPEAKER/STROBE
MOUNTING PLATE
WIRE GUARD CLAMPS
Electronic warranty form at www.sti-usa.com/wc14