STI 07551WR - Manual

Safety Technology International, Inc.
2306 Airport Road • Waterford, Michigan 48327-1209
Phone: 248-673-9898 • Fax: 248-673-1246
Toll Free: 800-888-4784 • E-mail: [email protected]
Web: www.sti-usa.com
Safety Technology International (Europe) Ltd.
Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch
Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999
Fax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only)
E-mail: [email protected] • Web: www.sti-europe.com
04876
MOUNTING
PLATE
OPTIONAL TAB
MOUNTING LOCATION
19033 ANCHOR
(6) PROVIDED
19002 SCREW
#8-32 x 3/8 in.
(4) PROVIDED
6297550
GASKET
19013 SCREW
#10 x 1 1/2 in.
(6) PROVIDED 06298 MOUNTING TABS
(6) PROVIDED
07550WR WIRE SHELF ON
AED MODELS (ADJUSTABLE)
ROTARY ACTION
LATCH (2) PROVIDED
SHOWN WITH COVER CLOSED
07551WR WIRE RACK
(INCLUDED WITH
AED MODEL)
19002 #8-32 x 3/8 in.
SCREWS AND (4) 19055
#8-32 KEPS NUTS PROVIDED
INSTALLATION OF STI-7550, STI-7551 & STI-7551AED PROTECTIVE CABINET
All specifications and information shown were current as of publication, and are subject to change without notice.
7550_51IS APRIL 2005
24.75 in.
(629mm)
19.75 in.
(502mm)
FRONT VIEW RIGHT SIDE VIEW
7.31 in.
(186mm)
Wash
w
3/8” DIA.
UEHX
UL 50
UL 2017
NEMA 4X
INSTALLATION INSTRUCTIONS:
1. Insert the 6 mounting tabs for vertical orientation, or 4 mounting tabs for horizontal
orientation, into the backbox slots as shown.
2. Using the installed tabs as a template, mark and drill 6 or 4, 1/4 in. diameter holes and
complete installation.
INSTALLATION NOTES:
1. Certain devices installed in this enclosure may require supervised high and low temperature
limits with the listed operational range of the installed device.
2. When replacing the gasket, lubricate it with victaulic brand coupling lubricant only.
3. All conduit fittings must be sealed per NEC 70.
CLEANING INSTRUCTIONS:
Rinse with water to remove abrasive dust and dirt. Wash with soap or mild detergent using a soft
cloth. (Do not scrub or use brushes or abrasives.) Rinse once more, then dry using a soft cloth or
chamois.
To remove grease or wet paint, rub gently with a cloth wetted thoroughly with naphtha (do not
use razor blades or gasoline) then wash and rinse.
Electronic warranty form at www.sti-usa.com/wc14