STI 8130 - Manual

Safety Technology International, Inc.
2306 Airport Road • Waterford, Michigan 48327-1209
Phone: 248-673-9898 • Fax: 248-673-1246
Toll Free: 800-888-4784 • E-mail: [email protected]
Web: www.sti-usa.com
Safety Technology International (Europe) Ltd.
Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch
Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999
Fax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only)
E-mail: [email protected] • Web: www.sti-europe.com
INSTALLATION OF STI-8100/STI-8130 SMOKE DETECTOR DAMAGE STOPPER ®
All specifications and information shown were current as of publication, and are subject to change without notice.
8100IS MAR2013
O
SPACER MOUNTING SCREW
OPTIONAL: STI RECOMMENDS USING
THE STI-8170 BACKPLATE TO ENSURE
SUITABLE PROTECTION ON UNSTABLE
MOUNTING SURFACES.
PLACE INSERT INTO SPACER NOTCH
WHEN CLEARANCE FOR ELECTRICAL
CONDUIT IS NOT NEEDED
STI-8101 2” SPACER
19038 SPANNER BIT (NOT INCLUDED)
COVER MOUNTING SCREWS - (4) EACH
STI-8100
19025 #8 x 2 PHIL. PAN HD. (INCLUDED)
19035 #8 x 2 SPANNER TAMPER SCREW
(NOT INLCUDED OPTIONAL SUB-81)
STI-8101 & STI-8130
19028 #8 x 1 1/2 PHIL. PAN HD. (INLCUDED)
19036 #8 x 1 1/2 SPANNER TAMPER SCREW
(NOT INCLUDED OPTIONAL SUB-82)
EXISTING SMOKE DETECTOR SP
(SURFACE MOUNT WITH
CONDUIT SHOWN)
STI-8100 POLYCARBONATE COVER
(CLEAR OR COLORED)
USING THE SPACER, OR THE COVER
AS A TEMPLATE. DRILL (4) HOLES
STI-8100 — 3/16" DIA.(4.8mm) USE 19018 ANCHOR
STI-8130 — 1/4" DIA.(6.3mm) USE 19033 ANCHOR
I
O
O
OPTIONAL SPANNER BIT FOR
TAMPER RESISTANCE (PART NO. 19038)
TAMPERPROOF SPANNER SCREW
SPACER REMAINS FASTENED TO
MOUNTING SURFACE
TO SERVICE SMOKE DETECTOR — LOOSEN
SPANNER SCREW APPROX .75 in.(19mm),
ROTATE COVER COUNTERCLOCKWISE
AND REMOVE COVER
VIEW SHOWING REMOVAL OF COVER
(PROCEDURE SAME WITH OR WITHOUT SPACER)
STI-8101 SPACER
19025 #8 x 2 PHIL. PAN HD. (INCLUDED)
19035 #8 x 2 SPANNER TAMPER SCREW
(NOT INLCUDED OPTIONAL SUB-81)
S
19028 #8 x 1 1/2 PHIL. PAN HD. (INLCUDED)
19036 #8 x 1 1/2 SPANNER TAMPER SCREW
(NOT INCLUDED OPTIONAL SUB-82)
E
O
8.25 in.(210mm)
3.75 in.
(95mm)
2.875 in.
(73mm)
1.875 in.
(48mm)
.75 in.
(19mm)
2 in.(51mm) CONDUIT SPACER
6.75 in.(171mm)
4.75 in.
(121mm)
STI-8100 POLYCARBONATE COVER
STI-8101 POLYCARBONATE SPACER
2.75 in.
(73mm)
STI-8170 BACKPLATE
(OPTIONAL) ADDS .25 in.(6.3mm)
S
APPROVALS
STI-8100 & STI-8130 GUARDS
Sentrol smoke detector models: 611UD, 612UD, 721UD, & 731UD under 300 Fpm.
STI-8100 GUARD ONLY
STI-8100 UL Listed No. S3504 for use with the following smoke detectors: System Sensor Models 2251, 2251T, 2251B, 2251TB,
2251TM, 2251TMB, 2251BR, 2551, 2551T, FTX-P1, FCI Models ASD-PL, ASD-P, ASD-PH, ASD-PTL, ASD-FILTEREX, ASD-FILTREXF,
MCS-ACCLIMATE, ASD-PL2, ASD-PL2F, ASD-PTL2, ASD-PTL2F, MCD-ACCLIMATE2, MCS-ACCLIMATE2F, ASD-PL2FR, Secutron Models
MR1-2251, MR1-2251B, EST Models 2251F, 2251FB, Mircom Models MIX-2251, MIX-2251B, Intelligent Systems Model ISL 2251,
JCI Model 2951J, ADT Model 2951ADT, Fire-Lite Model SD355, Gamewell Model SS-P, Honeywell Models TC806B1076,
TC806B1001 under 300 Fpm, Notifier Model FSP-751. NOTES
1. STI-8130 consists of (1) STI-8100 cover & (1) STI-8101 Spacer
including all standard mounting hardware.
2. Installer shall follow NFPA 72 National Fire Alarm code (protective
signalling systems) for installation testing and maintenance.
3. Do not paint this product. Painting may obstruct the flow of the
smoke to the detector.
4. When installing STI-8100 guard with Siemens detectors, sensitivity
adjustment is mandatory. See Siemens’ detector install sheet. Electronic warranty form at www.sti-usa.com/wc14