STI 102721 User Manual
Installation of sti-6518 bopper stopper, 6518 isometric.eps
INSTALLATION OF STI-6518 BOPPER STOPPER
®
All specifications and information shown were current as of publication and are subject to change without notice.
6518IS OCT2006
Safety Technology International, Inc.
2306 Airport Road • Waterford, Michigan 48327-1209
Phone: 248-673-9898 • Fax: 248-673-1246
Toll Free: 800-888-4784 • E-mail: [email protected]
Web: www.sti-usa.com
Safety Technology International (Europe) Ltd.
Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch
Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999
Fax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only)
E-mail: [email protected] • Web: www.sti-europe.com
NOTE
When installing cover, over appliance,
leave 1/4 in. clearance between top
surface and hinge to allow proper
clearance when cover is lifted.
If weather protection is not required,
discard gasket and spacer, they are
not needed.
1015980
SPACER ORIENTATION
TYPICAL FLUSH MOUNT INSTALLATION
TYPICAL SURFACE MOUNT INSTALLATION
PRODUCT DIMENSIONS
(INSIDE DIMENSIONS)
TOP VIEW
STI-6518
SIDE VIEW
STI-6518
ADHESIVE BACK GASKET
COVER ASSEMBLY
BACKPLATE FOR SURFACE
MOUNT APPLICATIONS ONLY
ADHESIVE BACK GASKET
COVER ASSEMBLY
102721 OPTIONAL
USE ADAPTER PLATE
WHEN ELECTRICAL BOX
IS SURFACE MOUNTED
SPACER FOR USE WITH GASKET
GASKET (INCLUDED)
10283 COVER ASSY.
1015980 SPACER FOR USE WITH GASKET (INCLUDED)
19054 #6-32 x 1/2 in.
PHIL. PAN HEAD SCREWS
(3) PROVIDED
(USE WITH GASKET)
19053 #6-32 x 3/8 in.
PHIL. PAN HEAD SCREWS
(3) PROVIDED
(USE WITHOUT GASKET)
102721 (OPTIONAL) USE ADAPTER PLATE
WHEN ELECTRICAL BOX IS SURFACE MOUNTED
OFFSET FACING REARWARD
AS SHOWN
EXISTING SINGLE
GANG OUTLET BOX
(NOT FURNISHED)
6518 Isometric.eps
19039 #6 x 1 1/4 in.
PHIL. PAN HEAD SS SCREWS
(3) PROVIDED
1.75 in.
(44mm)
3.25 in.
(82.5mm)
TOP VIEW
STI-6518
SIDE VIEW
STI-6518
5 in.
(127mm)
6.5 in.
(165mm)
101598 GASKET
INSTALL AFTER COVER ASSY. AND
SPACER HAVE BEEN SECURELY FASTENED.
TOP EDGE OF GASKET MUST BUTT AGAINST
BOTTOM OF SPACER AS SHOWN.
10283 COVER ASSY.
1015980 SPACER
EXISTING STOPPER STATION
19018 ANCHOR
(3) PROVIDED
PLACE BOPPER STOPPER
OVER APPLICANCE.
MARK AND DRILL
(3) 3/16 in. DIA.
HOLES 1 1/8 in. DEEP.
1 in. (25mm)
REMOVE ADHESIVE
BAKING PAPER
REMOVE ADHESIVE
BACKING PAPER
CENTER LINE
OF SPACER
UP
MAKE SURE SPACER IS
INSTALLED AS SHOWN WITH
MOUNTING HOLES BELOW CENTER LINE.
SPACER ORIENTATION
ADHESIVE BACK GASKET
COVER ASSEMBLY
BACKPLATE FOR SURFACE
MOUNT APPLICATIONS ONLY
ADHESIVE BACK GASKET
COVER ASSEMBLY
102721 OPTIONAL
USE ADAPTER PLATE
WHEN ELECTRICAL BOX
IS SURFACE MOUNTED
SPACER FOR USE WITH GASKET
GASKET (INCLUDED)
10283 COVER ASSY.
1015980 SPACER FOR USE WITH GASKET (INCLUDED)
19054 #6-32 x 1/2 in.
PHIL. PAN HEAD SCREWS
(3) PROVIDED
(USE WITH GASKET)
19053 #6-32 x 3/8 in.
PHIL. PAN HEAD SCREWS
(3) PROVIDED
(USE WITHOUT GASKET)
102721 (OPTIONAL) USE ADAPTER PLATE
WHEN ELECTRICAL BOX IS SURFACE MOUNTED
OFFSET FACING REARWARD
AS SHOWN
EXISTING SINGLE
GANG OUTLET BOX
(NOT FURNISHED)
6518 Isometric.eps
19039 #6 x 1 1/4 in.
PHIL. PAN HEAD SS SCREWS
(3) PROVIDED
1.75 in.
(44mm)
3.25 in.
(82.5mm)
TOP VIEW
STI-6518
SIDE VIEW
STI-6518
5 in.
(127mm)
6.5 in.
(165mm)
101598 GASKET
INSTALL AFTER COVER ASSY. AND
SPACER HAVE BEEN SECURELY FASTENED.
TOP EDGE OF GASKET MUST BUTT AGAINST
BOTTOM OF SPACER AS SHOWN.
10283 COVER ASSY.
1015980 SPACER
EXISTING STOPPER STATION
19018 ANCHOR
(3) PROVIDED
PLACE BOPPER STOPPER
OVER APPLICANCE.
MARK AND DRILL
(3) 3/16 in. DIA.
HOLES 1 1/8 in. DEEP.
1 in. (25mm)
REMOVE ADHESIVE
BAKING PAPER
REMOVE ADHESIVE
BACKING PAPER
CENTER LINE
OF SPACER
UP
MAKE SURE SPACER IS
INSTALLED AS SHOWN WITH
MOUNTING HOLES BELOW CENTER LINE.
SPACER ORIENTATION
ADHESIVE BACK GASKET
COVER ASSEMBLY
BACKPLATE FOR SURFACE
MOUNT APPLICATIONS ONLY
ADHESIVE BACK GASKET
COVER ASSEMBLY
102721 OPTIONAL
USE ADAPTER PLATE
WHEN ELECTRICAL BOX
IS SURFACE MOUNTED
SPACER FOR USE WITH GASKET
GASKET (INCLUDED)
10283 COVER ASSY.
1015980 SPACER FOR USE WITH GASKET (INCLUDED)
19054 #6-32 x 1/2 in.
PHIL. PAN HEAD SCREWS
(3) PROVIDED
(USE WITH GASKET)
19053 #6-32 x 3/8 in.
PHIL. PAN HEAD SCREWS
(3) PROVIDED
(USE WITHOUT GASKET)
102721 (OPTIONAL) USE ADAPTER PLATE
WHEN ELECTRICAL BOX IS SURFACE MOUNTED
OFFSET FACING REARWARD
AS SHOWN
EXISTING SINGLE
GANG OUTLET BOX
(NOT FURNISHED)
6518 Isometric.eps
19039 #6 x 1 1/4 in.
PHIL. PAN HEAD SS SCREWS
(3) PROVIDED
1.75 in.
(44mm)
3.25 in.
(82.5mm)
TOP VIEW
STI-6518
SIDE VIEW
STI-6518
5 in.
(127mm)
6.5 in.
(165mm)
101598 GASKET
INSTALL AFTER COVER ASSY. AND
SPACER HAVE BEEN SECURELY FASTENED.
TOP EDGE OF GASKET MUST BUTT AGAINST
BOTTOM OF SPACER AS SHOWN.
10283 COVER ASSY.
1015980 SPACER
EXISTING STOPPER STATION
19018 ANCHOR
(3) PROVIDED
PLACE BOPPER STOPPER
OVER APPLICANCE.
MARK AND DRILL
(3) 3/16 in. DIA.
HOLES 1 1/8 in. DEEP.
1 in. (25mm)
REMOVE ADHESIVE
BAKING PAPER
REMOVE ADHESIVE
BACKING PAPER
CENTER LINE
OF SPACER
UP
MAKE SURE SPACER IS
INSTALLED AS SHOWN WITH
MOUNTING HOLES BELOW CENTER LINE.
SPACER ORIENTATION
ADHESIVE BACK GASKET
COVER ASSEMBLY
BACKPLATE FOR SURFACE
MOUNT APPLICATIONS ONLY
ADHESIVE BACK GASKET
COVER ASSEMBLY
102721 OPTIONAL
USE ADAPTER PLATE
WHEN ELECTRICAL BOX
IS SURFACE MOUNTED
SPACER FOR USE WITH GASKET
GASKET (INCLUDED)
10283 COVER ASSY.
1015980 SPACER FOR USE WITH GASKET (INCLUDED)
19054 #6-32 x 1/2 in.
PHIL. PAN HEAD SCREWS
(3) PROVIDED
(USE WITH GASKET)
19053 #6-32 x 3/8 in.
PHIL. PAN HEAD SCREWS
(3) PROVIDED
(USE WITHOUT GASKET)
102721 (OPTIONAL) USE ADAPTER PLATE
WHEN ELECTRICAL BOX IS SURFACE MOUNTED
OFFSET FACING REARWARD
AS SHOWN
EXISTING SINGLE
GANG OUTLET BOX
(NOT FURNISHED)
6518 Isometric.eps
19039 #6 x 1 1/4 in.
PHIL. PAN HEAD SS SCREWS
(3) PROVIDED
1.75 in.
(44mm)
3.25 in.
(82.5mm)
TOP VIEW
STI-6518
SIDE VIEW
STI-6518
5 in.
(127mm)
6.5 in.
(165mm)
101598 GASKET
INSTALL AFTER COVER ASSY. AND
SPACER HAVE BEEN SECURELY FASTENED.
TOP EDGE OF GASKET MUST BUTT AGAINST
BOTTOM OF SPACER AS SHOWN.
10283 COVER ASSY.
1015980 SPACER
EXISTING STOPPER STATION
19018 ANCHOR
(3) PROVIDED
PLACE BOPPER STOPPER
OVER APPLICANCE.
MARK AND DRILL
(3) 3/16 in. DIA.
HOLES 1 1/8 in. DEEP.
1 in. (25mm)
REMOVE ADHESIVE
BAKING PAPER
REMOVE ADHESIVE
BACKING PAPER
CENTER LINE
OF SPACER
UP
MAKE SURE SPACER IS
INSTALLED AS SHOWN WITH
MOUNTING HOLES BELOW CENTER LINE.
SPACER ORIENTATION
ADHESIVE BACK GASKET
COVER ASSEMBLY
BACKPLATE FOR SURFACE
MOUNT APPLICATIONS ONLY
ADHESIVE BACK GASKET
COVER ASSEMBLY
102721 OPTIONAL
USE ADAPTER PLATE
WHEN ELECTRICAL BOX
IS SURFACE MOUNTED
SPACER FOR USE WITH GASKET
GASKET (INCLUDED)
10283 COVER ASSY.
1015980 SPACER FOR USE WITH GASKET (INCLUDED)
19054 #6-32 x 1/2 in.
PHIL. PAN HEAD SCREWS
(3) PROVIDED
(USE WITH GASKET)
19053 #6-32 x 3/8 in.
PHIL. PAN HEAD SCREWS
(3) PROVIDED
(USE WITHOUT GASKET)
102721 (OPTIONAL) USE ADAPTER PLATE
WHEN ELECTRICAL BOX IS SURFACE MOUNTED
OFFSET FACING REARWARD
AS SHOWN
EXISTING SINGLE
GANG OUTLET BOX
(NOT FURNISHED)
6518 Isometric.eps
19039 #6 x 1 1/4 in.
PHIL. PAN HEAD SS SCREWS
(3) PROVIDED
1.75 in.
(44mm)
3.25 in.
(82.5mm)
TOP VIEW
STI-6518
SIDE VIEW
STI-6518
5 in.
(127mm)
6.5 in.
(165mm)
101598 GASKET
INSTALL AFTER COVER ASSY. AND
SPACER HAVE BEEN SECURELY FASTENED.
TOP EDGE OF GASKET MUST BUTT AGAINST
BOTTOM OF SPACER AS SHOWN.
10283 COVER ASSY.
1015980 SPACER
EXISTING STOPPER STATION
19018 ANCHOR
(3) PROVIDED
PLACE BOPPER STOPPER
OVER APPLICANCE.
MARK AND DRILL
(3) 3/16 in. DIA.
HOLES 1 1/8 in. DEEP.
1 in. (25mm)
REMOVE ADHESIVE
BAKING PAPER
REMOVE ADHESIVE
BACKING PAPER
CENTER LINE
OF SPACER
UP
MAKE SURE SPACER IS
INSTALLED AS SHOWN WITH
MOUNTING HOLES BELOW CENTER LINE.
SPACER ORIENTATION
ADA
Compliant
ADA
Compliant
Electronic warranty form at www.sti-usa.com/wc14