STI 7520-HTR User Manual

Installation instructions

Advertising
background image

Safety Technology International, Inc.

2306 Airport Road • Waterford, Michigan 48327-1209
Phone: 248-673-9898 • Fax: 248-673-1246
Toll Free: 800-888-4784 • E-mail: [email protected]
Web: www.sti-usa.com

Safety Technology International (Europe) Ltd.

Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch
Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999
Fax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only)
E-mail: [email protected] • Web: www.sti-europe.com

INSTALLATION OF HEATED PROTECTIVE CABINETS STI-7520-HTR, STI-7521-HTR

All specifications and information shown were current as of publication, and are subject to change without notice.

7520-HTR IS JAN 2010

ILLUSTRATION 2

INSTALLATION INSTRUCTIONS

1. Remove heater plate assembly (Illustration 1) from back box by removing 4 flat head

screws and set aside.

2. Mount back box and cover assembly in desired position. With hinges horizontal or

vertical, insert the (4) mounting tabs into the back box slots (see Illustration 2).

Mark and drill (4) 1/4” diameter holes 1 1/4” deep. Insert plastic anchors and screw
back box to wall with (4) #10 x 1 1/2” screws.

3. Route wires for heater and appliance into back box through conduit or small hole

properly sealed.



7.11 in.

(181mm)

12.11 in.
(308mm)

8.46 in.

(214mm)

3.25 in.
(83mm)

12.51 in.
(318mm)

13.17 in.
(335mm)

8.09 in.(206mm)

10.06 in.(256mm)

1/4” DIAMETER

ILLUSTRATION 1


07503 THUMB LOCK (STI-7521-HTR)
18050 KEY LOCK (STI-7520-HTR)

6297520 COVER GASKET

19051 #8-32 x 3/8 in.
FLAT HEAD SCREW
(4) PROVIDED

SUB-7520-HTR
ASSEMBLY

19083 M-F #8-32 x 3/8 in.
STANDOFF (4) PROVIDED

ADDITIONAL STANDOFFS MAY BE REQUIRED

WHEN USING A WATERTIGHT

CONDUIT HUB (NOT INCLUDED)

19083 M-F #8-32 x 3/8 in.

19093 M-F #8-32 x 1-1/2 in.

19056 M-F #8-32 x 3 in.

19013 #10 x 1-1/2 in. PAN

HEAD SCREW (4) PROVIDED

19033 #10-12 PLASTIC
ANCHOR (4) PROVIDED

06298 MOUNTING
TAB (4) PROVIDED

NOTE: HOLE TO BE LOCATED

AND CUT IN BY INSTALLER

18021 3/4 in. NPT

WATERTIGHT CONDUIT

HUB (NOT INCLUDED)

CONTROL THERMOSTAT




10.09 in.

(256mm)

4.79 in.

(122mm)

Electronic warranty form at www.sti-usa.com/wc14



REMOVE

Advertising