STI 7521 - Manual

INSTALLATION OF STI-7520 & STI-7521 NEMA 4X PROTECTIVE CABINET
All specifications and information shown were current as of publication and are subject to change without notice.
7520_21 AUG2008
Safety Technology International, Inc.
2306 Airport Road • Waterford, Michigan 48327-1209
Phone: 248-673-9898 • Fax: 248-673-1246
Toll Free: 800-888-4784 • E-mail: [email protected]
Web: www.sti-usa.com
Safety Technology International (Europe) Ltd.
Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch
Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999
Fax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only)
E-mail: [email protected] • Web: www.sti-europe.com
10.875 in. (276 mm)
(Internal)
8.9 in.
(226 mm)
(Internal)
12.5 in. (318 mm)
7.125 in.
(181 mm)
.375 in.
(10 mm)
3.15 in.
(79 mm)
TOP VIEW
FRONT VIEW
INTERNAL PRODUCT
DIMENSIONS
STI-7520 SEALED ENCLOSURE W/KEY LOCK
STI-7521 SEALED ENCLOSURE W/THUMB LOCK
19033 ANCHOR
(4) PROVIDED
06298 MOUNTING TABS
(4) PROVIDED
19013 SCREW #10 x 1 1/2 in.
(4) PROVIDED
04874 MOUNTING PLATE
SCREW #8-32 x 1/2 in.
(4) PROVIDED
6297520 GASKET (1) PROVIDED
NEMA 4X
1/4” DIAMETER
FRONT VIEW
INSTALLATION INSTRUCTIONS
1. Insert the (4) mounting tabs into the (4) back box slots.
2. Using the installed mounting tabs as a template, mark
and drill (4) 1/4 in. diameter holes and complete
installation as shown.
INTERNAL PRODUCT
DIMENSIONS
TOP VIEW
CLEANING INSTRUCTIONS:
Rinse with water to remove abrasive dust and dirt. Wash with soap or mild
detergent using a soft cloth. DO NOT SCRUB OR USE BRUSHES OR ABRASIVES.
Rinse once more, then dry with a soft cloth or chamois. To remove grease
or wet paint, rub gently with a cloth wetted thoroughly with naphtha.
Then wash and rinse. DO NOT USE RAZOR BLADES OR GASOLINE.
Electronic warranty form at www.sti-usa.com/wc14