STI 9100 User Manual

Installation instructions, Cleaning instructions

Advertising
background image

Safety Technology International, Inc.

2306 Airport Road • Waterford, Michigan 48327-1209
Phone: 248-673-9898 • Fax: 248-673-1246
Toll Free: 800-888-4784 • E-mail: [email protected]
Web: www.sti-usa.com

Safety Technology International (Europe) Ltd.

Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch
Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999
Fax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only)
E-mail: [email protected] • Web: www.sti-europe.com

INSTALLATION OF STI-9100 LOCKABLE MINI-THERMOSTAT COVER

All specifications and information shown were current as of publication, and are subject to change without notice.

9100 AUG2008

INSTALLATION INSTRUCTIONS

1.

Do not remove thermostat. Prior to drilling anchor holes, cover thermostat with a damp
cloth to prevent dust from penetrating the sensor.

2.

Center frame over existing thermostat. Mark and drill (4) anchor holes using a 1/4 in.
(6.3mm) drill bit. Insert the (4) anchors and complete installation as shown.
NOTE: The (2) tabs on the frame must face upward as shown in illustration.

3.

Insert the (2) slots on the cover into tabs on top surface of frame. Rotate cover
downward onto the frame and turn key to lock.

CLEANING INSTRUCTIONS

To clean cover, remove from wall. Rinse with water to remove abrasive dust and dirt. Wash
with soap or mild detergent using a soft cloth (DO NOT SCRUB). Rinse once more, then dry
with a soft cloth or chamois. To remove grease or wet paint, rub gently with a cloth wetted
thoroughly with naphtha. Then wash and rinse. DO NOT USE RAZOR BLADES.

3 in.

(76mm)

4.25 in.

(108mm)

2.5 in.

(64mm)

3.50 in.

(89mm)

5.37 in.

(136mm)

3 in.

(

STI-9100

PRODUCT DIMENSIONS

V

DRILL (4) HOLES .25in. (6.3mm) DIAMETER

EXISTING THERMOSTAT

THE TWO (2) COVER
TABS MUST FACE UPWARD.
SEE VIEW A

19013 SCREW #10 x 1 1/2 PHIL PAN HEAD
(4) PROVIDED

91002 COVER

AND LOCK ASSEMBLY

KEY (2) PROVIDED

91001 FRAME

CENTER FRAME OVER THERMOSTAT, MARK

AND DRILL (4) 1/4 in. (6.3mm) HOLES AND

COMPLETE ASSEMBLY AS SHOWN.

19033 ANCHOR

(4) PROVIDED

VIEW A

91002 COVER

FRAME TAB

91001 FRAME

Electronic warranty form at www.sti-usa.com/wc14

Advertising