Operational instructions general description – STI ED-55-TRANSFORMER User Manual

Page 2

Advertising
background image

Operational Instructions

General Description

This new generation barking dog alarm features realistic sounds and voice operating
status. Ferocious barking dogs, greetings or alarms are available. Rex Plus

®

II is

versatile and provides an excellent way to deter burglars, without the annoying
problems of owning a real dog. With his electronic radar eyes, Rex Plus

®

II can

“see” through thick doors, walls and glass. Once the cord is plugged into any
standard 120VAC outlet (for indoor use only), he’ll stay
on duty around the clock. Portable operation is available
by installing the optional batteries.

For outdoor use,

battery operation only. Note: Rex Plus

®

II uses a 2.4GHz

microwave radar detection system. It shares operation in
a band of frequencies along with other electronic devices
such as microwave ovens, Wi-Fi, wireless keyboards and
other wireless controls. These can also cause undesirable
false detections. Reducing the sensitivity and repositioning the unit to aim away from
these sources can be helpful.

Fig. 1

Fig. 2

Fig. 3

LID

FRONT

OF UNIT

1. Plug in unit (Fig. 1).
2. Open lid. Adjust volume and sensitivity to

lowest level (fully counterclockwise). (Fig. 2)

3. Turn unit on. You will hear, “Warming up.”

After 30 seconds, unit will say, “Armed.”
Red LED will blink while warming up; solid
when ready.

4. Move switch to choose: Dog ( ), Greeting

( ) or Siren ( ) (Fig. 2)

5. Press sound selection button to select

sound in each category.

(Fig. 2)

6. Adjust volume and sensitivity, clockwise, to desired

level.

7. Point the front of the unit (wider face) towards the

detection area. Note: The unit has reduced sensitivity
at the back of the unit. (Fig. 3)

8. 15 minute mute (Red LED will blink)

• With lid open, tap the mute button.

• When lid is closed, tap raised grooves on the
lid to activate.

9.

For outdoor use, portable use or as backup,
install 6 “C” alkaline batteries.
After arming and
no detection for 5 minutes, the LED changes to a
slow blink to extend battery life.

Note: When batteries are

low ED-55 will state “Please replace batteries,” only at power up

and when mute button is pressed.

SOUND

SELECTION

BUTTON

Advertising
This manual is related to the following products: