STI 30325 - Manual (Page 3)

- 3 -
STEP 5
Using a sharp implement such as that
enclosed, carefully peal away the number
segments where you want the light to show
through. You can create up to 5 digits for
your house number.
To the right is an example of how to create the
various numbers.
STEP 6
Replace the black number panel. Then replace the
top section of the unit and insert screws by turning
screwdriver clockwise.
STEP 7
If you are planning to mount your Solar
Power House Number in the ground, then
assemble the tubes as shown and insert
them into the two circular openings.