Anthro Carl's Table CT03 Assembly Instructions - Manual (Page 4)

Front of table
Back of table
To tilt forward limit switch J12
To tilt back limit switch J11
*To right zone of table limit switch J23
*To front work surface limit switch J22
*To left zone of table limit switch J10
To tilt control actuator J15
To main table control interface J14
To 12VDC adapter
J17 To 12VDC relay
J18 To 0-10VDC ballast
J16 To height control actuator
J13 To light control interface
* These connections are interchangeable