Anthro Convoi Base Unit Assembly Instructions - Manual (Page 2)

welcome
Thank you for purchasing Convoi®!
This instruction covers the assem-
bly for Convoi base units, but does
not cover other components. Please
review all the instructions before
beginning any assembly to
determine the best sequence. Check
the Assembly Sequence note on each
assembly instruction for help making
that determination.
If you have any questions or if we
can help you in any way, please
contact us at 800.325.3841.
notes
Use a power driver/drill with
appropriate bits to make it easier on
yourself.
Fastener quantities listed here are the
minimum required for this assembly.
You may receive a few extras which
are not counted on the Parts List.
PArts list
Before beginning assembly of your Convoi Base Unit,
please review the parts list to verify that your shipment
is complete.
2
component Quantity Part number
01 19.5" Leg Column (for Standard Cart) 2 280-3035-00
01 25.5" Leg Column (for Tall Cart) 2 280-3036-00
01 31.5" Leg Column (for Extra Tall Cart) 2 280-3046-00
02 Rubber Cable Blade 4 175-5215-00
03 24" Cross Tube (for 24" wide Cart) 2 125-5285-23
03 30" Cross Tube (for 30" wide Cart) 2 125-5292-23
04 Foot 2 250-5028-00
05 5/16-18 x 3.5" Bolt 4 325-5194-00
06 1/4-20 x 3/4" Cap Screw 8 325-5264-00
07 5" Total Lock Caster (silver tab) 2 150-5062-00
08 5" Swivel Lock Caster (green tab) 2 150-5063-00
09 5/32" Hex Driver (not shown) 1 375-5000-00
10 3/16" Allen Key (not shown) 1 375-5028-00
04
03
02
06
07
05
01
07
08
08