Anthro Elevate Original Adjusta Assembly Instructions - Manual (Page 6)

6 Questions? Call us at 800.325.3841 or visit anthro.com. We’re happy to walk you through the assembly!
Elevate Adjusta Assembly Instructions 7
STEP 8
Install Keypad and Control Box
¡ Select positions for the Keypad and Control Box,
either the left or right side of the Table. Remember
that the Keypad and Control Box must be on the same
side of the Table. Also, the power cord comes off the
back of the Control Box and should be positioned so
it can reach the outlet.
¡ Place the Control Box on the shelf so that the cord
outlets are at the back, then align the Box with the
pre-drilled holes on the shelf. Secure with four
1" Button-head Screws.
¡ Select the position for the Keypad, on the same side of
the table as the Control Box. Align the Keypad and its
housing with the four pre-drilled holes at the front of
the keyboard surface so that the buttons are face-
down at the front edge of the keyboard surface and
the flat side of the housing is against the shelf. Using
four Phillips Head Screws, attach the Keypad and its
housing to the front of the keyboard surface.
¡ Plug the leg cords into the Control Box. Use the
shortest cord to connect with the nearest leg. Insert
cable clips into the table and route leg cords through
them. Plug the keypad cable into Control Box. Insert a
cable clip into the table and route the cord through it.
STEP 7
Attach Adjusta Mechanism to Keyboard Surface
¡ Slide the Keyboard Surface under the
mechanism arms. Align the three holes on
each end of the Keyboard surface with the
three holes on each mechanism arm. Secure
the arms to the Keyboard Surface with six
1" Button-head Screws.
¡ Position the Paddle on the Keyboard Surface
so the four holes on the Paddle align with
the four holes on the Keyboard Surface and
the brake cable runs under the Adjusta Bar.
Secure the Paddle to the Keyboard Surface
with four 1" Button-head Screws.
3/4” Phillips Screw
325-5370-00
Keypad
Alternate
Keypad
Location
Keypad Detail
Cable Snap-in Clip
175-51188-00
1” Btn-Hd Screw
325-5580-00
1” Btn-Hd Screw
325-5580-00