Alpine CDA-7892 - Manual (Page 31)

29
-EN
Storing XM Channel Presets
1
Press the BAND button to select the desired band
(XM1 or XM2) you want to store.
2
After tuning in the desired channel, press and hold any
one of the Preset buttons (1 through 6) that you want
to store the station on for at least 2 seconds. The
selected station is stored.
3
Repeat the procedure to store up to 5 other channels
onto the same band.
To use this procedure for other bands, simply select
the band desired and repeat the procedure.
A total of 12 channels can be stored in the preset
memory (6 channels for each band; XM1 and XM2).
NOTE
If you store a channel in a preset memory which already has a
station, the current channel will be cleared and replaced with the
new one.
Receiving Stored XM Channels
1
Press the BAND button to select the desired band
(XM1 or XM2).
→ FM1 → FM2 → XM1 → XM2 → AM
2
Press the channel Preset button that has your desired
satellite channel in memory.
Category Search
Category Search functionality allows you to search for a
specific channel by the category of programming it
offers, or to surf within a given category.
1
In XM mode, press the CAT button to display the
category of the channel that is currently selected for 5
seconds.
2
While the category is displayed, press the
g DN or f UP button to select a different
category (or leave it to stay with the same category.)
3
Within 5 seconds of selecting the category, press the
CAT button again to select the next channel within that
category. Repeatedly press the CAT button within 5
seconds to select additional channels within that
category.
When tuned in, the category is displayed for 5
seconds, then the display returns to normal mode.
NOTE
If you cannot find your desired category, the display shows
“----” for 2 seconds automatically.
Changing the Display
Text information, such as the channel name, artist
name/feature, and song/program title, is available with
each XM channel. The unit can display this text
information as explained below.
1
In XM mode, press the TITLE button.
Each time you press this button, the display changes
as shown below.
NOTES
• When The “Scroll Setting” (refer to page 15) is set to “SCR
AUTO”, the display scrolls.
When the CD Text Scroll Setting is set to “SCR MANUAL”
(CDA-7892: "SCR MANU"), the display scrolls only when
you operate the unit (POWER ON, BAND, etc., are
displayed.)
Press and hold the TITLE button for more than 3 seconds to
scroll the display again.
• “Channel Number” and “Clock” displays do not scroll.
• Depending on the model, the display may differ from the one
shown above.
Channel Name
display → → → CLOCK
display
Artist Name
display ← Song Title
display ←
Channel Number
display